A4596

Marmon Ride Control (formerly DEA Products) has been a trusted manufacturer of engine and transmission mounts for over 30 years. Marmon Ride Control uses the highest quality of raw materials available, and thoroughly tests their products with state-of-the-art lab equipment to ensure that you'll be installing a mount that will meet or exceed your original mount's specifications. Testing Includes: Visual Inspection Visual / Finish Paint / Rubber Appearance Weld Integrity Dimensional Verification Dimensions tested / approved using CMM (machine which takes readings in six degrees of freedom and displays these readings in mathematical form) Elastomer / Durometer Tested Rubber Hardness Check Every shipment inspected thoroughly Supplier verification on site Rubber Tensile Strength tested Strip sample and test of rubber processing Supplier must submit test report and sample from every batch On-site audits to verify process capabilities Thermogravimetric Analysis TGA / Rubber Compression Tests (changes in physical and chemical properties of mount materials are measured as a function of increasing temperature (with constant heating rate), or as a function of time (with constant temperature and/or constant mass loss)) Rheometer / Vulkameter tested (measure the way rubbers respond to applied forces) Supplier must submit test report and sample from every batch On-site audits to verify process capabilities Tips & Tools For The Repair Inspect Motor Mounts (found in the "Engine" category) for signs of wear. Transmission and Motor Mounts typically wear at the same rate The original mount bolts can be difficult to remove. Apply Penetrating Oil and have a Breaker Bar handy to help break them loose Apply Blue Threadlocker to mount bolts prior to installation to prevent backing out due to the high vibrations transmission mounts are subject to

Features & Benefits:
• Visual Inspection Visual / Finish Paint / Rubber Appearance Weld Integrity
• Visual / Finish
• Paint / Rubber Appearance
• Weld Integrity
• Dimensional Verification Dimensions tested / approved using CMM (machine which takes readings in six degrees of freedom and displays these readings in mathematical form)
• Dimensions tested / approved using CMM (machine which takes readings in six degrees of freedom and displays these readings in mathematical form)
• Elastomer / Durometer Tested Rubber Hardness Check Every shipment inspected thoroughly Supplier verification on site
• Rubber Hardness Check
• Every shipment inspected thoroughly
• Supplier verification on site
• Rubber Tensile Strength tested Strip sample and test of rubber processing Supplier must submit test report and sample from every batch On-site audits to verify process capabilities
• Strip sample and test of rubber processing
• Supplier must submit test report and sample from every batch
• On-site audits to verify process capabilities
• Thermogravimetric Analysis TGA / Rubber Compression Tests (changes in physical and chemical properties of mount materials are measured as a function of increasing temperature (with constant heating rate), or as a function of time (with constant temperature and/or constant mass loss)) Rheometer / Vulkameter tested (measure the way rubbers respond to applied forces) Supplier must submit test report and sample from every batch On-site audits to verify process capabilities
• TGA / Rubber Compression Tests (changes in physical and chemical properties of mount materials are measured as a function of increasing temperature (with constant heating rate), or as a function of time (with constant temperature and/or constant mass loss))
• Rheometer / Vulkameter tested (measure the way rubbers respond to applied forces)
• Supplier must submit test report and sample from every batch
• On-site audits to verify process capabilities