10825

Lucas DOT 3 Brake Fluid is a high quality blend of polyethylene glycol ethers and additives which meet or exceed the industry minimum dry boiling point of 401'F. It meets the Federal Motor Vehicle Safety Standards (FMVSS) No. 116 and SAE J1703 specifications. Lucas DOT 3 Brake Fluid is recommended for use in both disc and drum brake system and clutch system where this type of product is called out for. Features: Prevents seal hardening or softening Protects against rust or corrosion Provides excellent lubricity Compatible with all brake system rubber components and other fluids Brake Fluid Comparison Chart Fluid Type Compatible With Quality Chemical Composition Minimum Dry Boiling Point Minimum Wet Boiling Point DOT 3 DOT 3 Brake Systems Good Glycol Ether 401°F 284°F DOT 4 DOT 3 & DOT 4 Brake Systems Better Glycol Ether, Borate Ester 446°F 311°F DOT 5.1 DOT 3, DOT 4 & DOT 5.1 Brake Systems Best Glycol Ether, Borate Ester 518°F 374°F DOT 5 DOT 5 Brake Systems ONLY Specialty Silicone 500°F 356°F How do I know if my brake fluid needs to be changed? Brake fluid absorbs moisture. Water in brake fluid can boil during repeated or extended braking, creating air bubbles which reduce braking effectiveness. Water also can corrode metal brake lines. Change your brake fluid when: A Brake Fluid Tester shows excess moisture Fluid is dirty or rust-colored (it should be clear or translucent) Brake pedal feels mushy or requires a lot of pressure (possible air bubbles) You've reached the miles or years your owner's manual recommends for fluid changes Not returnable once opened. Videos The Different Types of Brake Fluid

Features & Benefits:
• Prevents seal hardening or softening
• Protects against rust or corrosion
• Provides excellent lubricity
• Compatible with all brake system rubber components and other fluids