TERREPOWER
N3050158
$391.79
Part #N3050158 · SKU terrepower-n3050158 · Backordered
Terrepower products are manufactured using 100% premium parts and are built and tested to meet or exceed OE standards. Terrepower does not substitute adapted, converted or “will fit” components, which means that the new unit is an exact replacement for the original equipment part. Installation Tips Replace Power Steering Pressure and Return Hoses when replacing the rack & pinion. Steering hoses can degrade internally and cause contamination in the power steering system, which can damage the new rack & pinion Completely flush the system with an OE approved Power Steering Fluid prior to installation (the correct type of fluid is noted on the reservoir cap or in your owner's manual). Flushing the system is critical to prevent system contamination and failure Consider installing a Power Steering Filter on the Power Steering Return Hose to prevent system contamination and extend the life of the power steering components Bleed the system to prevent noise and extend the life of the steering components Helpful Tools: Power Steering Bleeder Kit | Leak Detection Dye | Ultra Violet (UV) Light Videos Flush Procedure How To Troubleshoot and Install A Rack & Pinion Vacuum Bleeding The Power Steering System Additional Resources Installation Instructions Power Steering Vacuum Bleed Procedure Power Steering Flush Procedure WARNING: Attention California Customers - WARNING: Cancer and Reproductive Harm. See www.p65warnings.ca.gov
Features & Benefits:
• Replace Power Steering Pressure and Return Hoses when replacing the rack & pinion. Steering hoses can degrade internally and cause contamination in the power steering system, which can damage the new rack & pinion
• Completely flush the system with an OE approved Power Steering Fluid prior to installation (the correct type of fluid is noted on the reservoir cap or in your owner's manual). Flushing the system is critical to prevent system contamination and failure
• Consider installing a Power Steering Filter on the Power Steering Return Hose to prevent system contamination and extend the life of the power steering components
• Bleed the system to prevent noise and extend the life of the steering components
Features & Benefits:
• Replace Power Steering Pressure and Return Hoses when replacing the rack & pinion. Steering hoses can degrade internally and cause contamination in the power steering system, which can damage the new rack & pinion
• Completely flush the system with an OE approved Power Steering Fluid prior to installation (the correct type of fluid is noted on the reservoir cap or in your owner's manual). Flushing the system is critical to prevent system contamination and failure
• Consider installing a Power Steering Filter on the Power Steering Return Hose to prevent system contamination and extend the life of the power steering components
• Bleed the system to prevent noise and extend the life of the steering components
Delivery2–4 business days
PaymentSecure card checkout
FitmentGuaranteed to fit
Returns90-day easy returns
| Bushings Included | Yes |
|---|---|
| Distance Between Mounting Holes (IN) | 3.981 IN |
| Distance Between Mounting Holes (mm) | 101.117 mm |
| Inner Tie Rods Included | Yes |
| Input Shaft Length (IN) | 2.75 IN |
| Input Shaft Length (mm) | 69.85 mm |
| Mounting Hole Quantity | 2 |
| Outer Tie Rods Included | No |
| Pressure Port Thread Size | M16x1.50 |
| Return Port Thread Size | M16x1.50 |
| Total Turns Lock To Lock | 2.625 |
| Type | Hydraulic |
Loading vehicles…
Page 1


